Dr. G.D.Acharya

  • Dr. G.D.Acharya,” Evaluation of Surface Crack in EN19 Crank Shaft Found in Forging Process: A Review” STM(Recent Trends in Fluid Mechanics),Vol.3,Issue 3,Feb.2017
  • Dr. G.D.Acharya,” Improvement of the Space Management of Any Organization Using Different Japanese Management Tool”, STM(Journal of Industrial Safety Engineering),Vol.3,Issue3,Nov.2016.
  • Dr. G.D.Acharya ” The Effect of CNT Coating on Convective Heat Transfer Coefficient, Heat Flux, Roughness, Pressure Drop of Porous Material with 3-Omega Technique: A Review”, STM(A Journal of Nanotechnology and Its Applications),Vol.18, Issue 3,Dec.2016
  • G.D. Acharya, Biren J. Saradava,” Evaluation of Surface Crack in EN19 Crank Shaft Found in Forging Process: A Review”, Journal of Recent Trends in Fluid Mechanics, Volume 3, Issue 3, Dec 2016, ISSN: 2455-1961(online), Pg. No. 15-18.
  • Dr. G.D.Acharya, Mrs.Sheetal D.Tank, Prof.Ashish M.Kothari, “R & D -Emerging Methodologies In Engineering Education And India’s Future”, Iste At L.D.College, January 2015
  • Dr. G.D.Acharya,Prof.Ravi Patel, “Industry Institute Interaction: Need For Conjoint Efforts” , Iste At L.D.College, January 2015
  • Dr. G.D.Acharya, Prof. Jayesh N.Rathod,Prof. Dipak K. Upadhyay, “Ict As A Change Agent For Technical Education- A Case Study Of Atmiya Institute Of Technology And Science”, Iste At L.D.College,Janurary 2015
  • Dr. G.D.Acharya, “Environmentally Responsible Manufacturing”, Emerging Trends In Engineering,Technology & Management, February 2014
  • Dr. G.D.Acharya, “Expandable Workholding Collet Used In Fixture For Limiting Deformation A Review”, Contemporary Issues In Engineering & Technology, March 2014
  • Dr. G.D.Acharya, “Design Parameters Of A Portable Mini Solar Pond For Magnetocaloric Engine”, Environment Friendly Manufacturing For Foundry Industries, March 2014
  • Dr. G.D.Acharya, “Environment Friendly Manufacturing For Foundry Industries”, Contemporary Issues In Engineering & Technology, March 2014
  • Dr. G.D.Acharya, “A Review On Fixture Design And Development”, Contemporary Issues In Engineering &Technology, March 2014
  • Dr. G.D.Acharya, “Corrosion Never Sleeps- An Overview Of Cathodic Protection In Ships”, Corcon-2014, September 2014
  • Dr. G.D.Acharya, H.A.Patel,V.R.Pilania, “Comparative Study Of Minimum Quantity Lubrication For Machining Process”, Chennai, February 2015
  • Dr. G.D.Acharya, “Cleaner Production Concept For Foundary Industries-Need Of The Day”, Asian International Conference On Science,Engineering & Technology At G.E.C.Bharuch, March 2015
  • G.D.Acharya M.V.Sheladiya, Shailee G.Acharya, , Analysis Of No-Bake Sand Casting Defects-A Review, Advances In Materials And Product Design, January, 2015.
  • G.D.Acharya Shailee, Jeetendra A.Vadher, G.D.Acharya, A Review On Evaluating Of Green Manufacturing For Sustainable Development In Foundry Industries, International Journal Of Emerging Technology And Advanced Engineering, January, 2014.
  • G.D.Acharya Y.D.Jadeja, , Khemchand Malakar, A Review On Fixture Design For Connecting Rod, International Journal For Research In Technological Studies, March, 2014.
  • G. D. Acharya C. R. Sanghani, , A Review Of Research On Improvement And Optimization Of Performance Measures For Electrical Discharge Machining, International Journal Of Engineering Research And Applications, January, 2014.
  • G. D. Acharya M. M. Korat, , A Review On Current Research And Development In Abrasive Waterjet Machining, International Journal Of Engineering Research And Applications, January, 2014.
  • G.D.Acharya V.J.Panchal, B.M.Garala, , Review On Selection Of Rotary Indexing Mechanism For High Productivity, International Journal For Research In Technological Studies, January, 2014.
  • G.D. Acharya, Chetankumar M. Patel, Design And Manufacturing Of 8 Cylinder Hydraulic Fixture For Boring Yoke On Vmc-1050, 2nd International Conference On Innovations In Automation And Mechatronics By Science Direct, January,2014.
  • G.D.Acharya, M.V.Sheladiya, Shailee G. Acharya, “Review Paper On Defects In No-Bake Sand Casting With Furfuryl Resin”, Advances In Materials & Product Design S.V.N.I.T. Sural January 2015
  • G.D.Acharya, Shailee G. Acharya, M.V.Sheladiya, “Environmentally Responsible Manufacturing- Need Of The Day For Foundry Industry”, National Conference On Emerging Trends In Engineering, Technology & Management January 2014
  • G.D.Acharya, Shailee G. Acharya, M.V.Sheladiya,  “Environmental Friendly Manufacturing For Foundry Industries” 1st International Conference On Contemporary Issues In Engineering & Technology March-2014
  • G.D.Acharya, Shailee G. Acharya, M.V.Sheladiya, “Modern Fnb System To Foundry Industries For Sustainable Growth”, National Conference On Recent Advancement In Manufacturing June 2014
  • G.D.Acharya Chetankumar M.Patel, , Expandable Workholding Collet Used In Fixture For Limiting Deformation A Review, International Conference On Challenges In It, Engineering And Technology, July, 2014.

 

Dr. P. S. Puranik

  • P.S.Puranik,S A Puranik, “Failure Analysis Of Rotating Equipments & Accessories”, Journal Of Process Equipments & Piping Technology,Volume:1, Issue:1, September 1994
  • P.S.Puranik, S A Puranik, “Principles Of Optimum Pipe Size Selection”, Journal Of Process Equipments & Piping Technology,Volume:1, Issue:1, June 1994
  • P.S.Puranik, S A Puranik,” Guide Lines For Designing A Cyclone Separator”, National Seminar On “Material Handling Technology”, November 1993
  • P.S.Puranik, D K Ghosh, “Utilization Of Non Conventional Energy Resource – Hidden Energy (Heat Of Reaction) Via Energy Conservation Technique (Ect)”, International Journal Of Applied Engineering Research,
  • P.S.Puranik, D K Ghosh,” Achieving Co-Ordination Between Production Rate And Demand Rate In Manufacturing Systems”, International Journal Of Research In Mechanical Engineering & Technology, Volume :8,Issue:2, August 2013
  • P.S.Puranik, D K Ghosh, “Optimal Selection Of The Right Metal Casting Processe”, International Journal Of Mechanical Engineering Research, Volume:2, Issue:3, June 2012
  • P.S.Puranik, “Managing Business In A Competitive Business Environment Through Hoshin Process Of Long Range Strategic Planning” Rattan International Journal Of Management & Technology(Rijmt), December 2011
  • P.S.Puranik, “Improving The Productivity Of A Lecturer”, “Industrial Engineering Journal”, Indian Institution Of Industrial Engineering, August 2012
  • P.S.Puranik, “Dry Machining: An Introduction “,Journal Of Engineering & Technology, S. P. University”, Volume:1, Issue:1, March 2000
  • P.S.Puranik, G D Bhatt, “Pump Vibration: Its Analysis & Prevention”, Volume:1, Issue:1, December 1994
  • P.S.Puranik, G D Bhatt, “Total Quality Management”, Journal Of Engineering & Technology, Volume:1, Issue:1, December 1994
  • P.S.Puranik, D K Ghosh,” Energy Conservation Through Design Modification And Technological Advancement In Indian Cement Industry”, International Conference On Sunrise Technologies Icost 2011- Mechanical Engg”, By Bsdecep, Dhule & Jjt University Rajasthan, January 2011
  • P.S.Puranik,” Shot Peening Process And Its Applications”, The International Conference On “Shot Peening And Blast Cleaning – Ii ”, By Mact, Bhopal, September 2001
  • P.S.Puranik, “Managing Business In A Competitive Business Environment Through Hoshin Process Of Long-Range Strategic Planning”, National Conference On “Managing Global Business In Competitive Business Environment” At Institute Of Management & Technology, Rattan Group Of Institutions, Mohali, May 2010
  • P.S.Puranik D K Ghosh,” Applications Of Operation Research Methods In Manufacturing With Special Reference To Cim”, National Conference On Statistics, Computer And Applications By Dept. Of Statistics Saurashtra University, Rajkot, March 2010
  • P.S.Puranik, G P Kakkad, “End Effectors For A Robot”, National Conference On “Emerging Trends In Mechatronics”, By Marathwada Inst. Of Tech & Maharashtra Inst Of Tech, Aurangabad, July 2004
  • P.S.Puranik, G P Kakkad, “Automation For Two-Axis Motion Control”, Advances In Mechanical Engineering”, By Jawaharlal Dadra Inst. Of Engg & Tech, Yavatmal, April 2004
  • P.S.Puranik, M A Popat,” Fuel Cells-Power Source For Future”, 25th National Renewable Energy Convention 2001 Of The Solar Society Of India, December 2001
  • P.S.Puranik, “Modern Approaches For Design And Development Of Products And Processes”, 12th Isme Conference On “Challenges In Product And Process Design And Development In The Information Era, January 2001
  • P.S.Puranik, G D Bhatt, S A Puranik, “Pumping Machinery: Its Selection, Sizing & Trouble Shooting” , National Seminar On “ Pumps & Pumping Machinery”, By Institution Of Engineers (India), June 1996
  • P.S.Puranik, S A Puranik, “Process Engineering Considerations For Two Phase Flow In Pipe Lines”, National Conference On “Piping Technology, December 1995
  • P.S.Puranik, S B Pandya “Guide Lines For Designing A Cyclone Separator”, National Seminar On “Material Handling Technology, November 1993
  • P.S.Puranik, G D Bhatt, S A Puranik,” Energy Conservation In Utilities For Process Industries”, National Seminar On “Energy Management In Process Industries”, May 1994
  • P.S.Puranik, Chirag Joshi, , Review Of Implementation Of Lean Manufacturing In Cement Industry, International Journal Of Scientific Research & Development, September, 2014.
  • P.S.Puranik, P T Bhusari, S A Puranik,” Journal Of Process Equipments & Piping Technology”, Failure Analysis Of Rotating Equipments & Accessories, Volume:1, Issue:1 September 1994
  • P.S.Puranik “Non Value Added Time Reduction and Process Cycle Efficiency Improvement by Implementing Inventory Management System”, International Journal Of Engineering Development And Research, Vol. 5, issue 2, Aril 2017.
  • P.S.Puranik “An Approach to Reduce Non-Value Added Time and Improve Process Cycle Efficiency by Implementing Project Information System”, International Journal for Research in Applied Science & Engineering Technology, Vol.5,Issue 4,April 2017.
  • P.S.Puranik “A Review on Inventory Management System for Improving Efficiency of Project Development Cycle”, Journal of Advanced Database Management & Systems, Vol. 3,Issue 3, 2017.
  • P.S.Puranik “A Review on Project Information System for Improving Efficiency of Project Development Cycle”, Research & Reviews: A Journal of Embedded System & Applications, Vol. 4, Issue 3,2017.
  • P.S.Puranik “optimization of design parameter of vertical machining center column for the weight and rigdity”, International Journal of Advance Engineering and Research Development, Vol. 4, Issue 3, 2017.


M.S.Kagthara

  • S.Kagthara R.D.Gohil, , Design Of Cam Geometry For Minimization Of Fillet Radius Effect In Square Hole Drilling Operation, International Journal For Research In Technological Studies, April, 2014.
  • S.Kagthara Nimesh A. Khirsariya, , P.J.Mandalia, Reduction Of Shrinkage Defect In Valve Body Casting Using Simulation Software, International Journal Of Engineering Sciences & Research Technology, April, 2014.
  • S.Kagthara P.H.Solanki, , N.J.Chotai, Process Parameters Effect Of Resistance Spot Welding On Weld Quality- A Review, International Journal Of Futuristic Trends In Engineering And Technology, September, 2014.
  • S.Kagthara H.N.Jani, , R.L.Patel, Identification Of Link Adjacency & Joint Incidence In A Kinematic Chain Using Genetic Algorithm, National Conference Proceeding On Advancement & Futuristic Trends In Mechanical Engineering, November, 2008.
  • S.Kagthara R.L.Patel, , Bio Diesel From Plant Oil A Future Alternative Fuel For Diesel Engine, Emerging Technologies & Applications , October, 2006.
  • S.Kagthara H.N.Jani, , R.L.Patel, Identification Of Link Adjacency & Joint Incidence In A Mechanism Using Genetic Algorithm, Advancement & Futuristic Trends In Mechanical Engineering, November, 2008.
  • S.Kagthara R.L.Patel, , H.N.Jani, National Conference On Emerging Technologies &Application, Energy Engineering And Eco-Balance, February, 2009.
  • S.Kagthara H.N.Jani, , R.L.Patel, Identification Of Link Adjacency & Joint Incidence In A Mechanism Using Genetic Algorithm, Ncmsta, November, 2008.
  • S.Kagthra, State Of The Art Review On Hybrid Genetic Algorithm For Job Shop Scheduling, Ganpat University, February, 2015.
  • S.Kagthara. N.V.Ranchh, , Expanding Mems With Low Cost Soi Wafers, Nacams, October, 2004.
  • S.Kagthara H.N.Jani, , R.L.Patel, Algorithmic Identification Of Link Adjacency& Joint Incidence In Six Link Kinematic Chain, Emerging Research &Advances In Mechanical Engineering, November, 2009.
  • S.Kagthara,” Teaching Learning Based Optimization – A Review”, Sitarambhai Nanjibhai Patel Institute Of Technology & Research Center, April 20015
  • S.Kagthara,” A State Of The Art Review On Dispatching Rules For Job Shop Scheduling”, Asian International Conference On Science, Engineering & Technology At G.E.C.Bharuch, March 2015
  • S. Kagthara H. D. Santoki, , Kailash Patel, Design Of Quality Improvement System Framework For Ceramic Tile Manufacturing-A Review, International Journal Of Futuristic Trends In Engineering And Technology, September, 2014.
  • S.Kagthara , Nimesh A. Khirsariya , P.J.Mandaliya, “Reduction Of Shrinkage Defect In Valve Body Casting Using Simulation Software”, International Journal Of Engineering Science And Research Technology (Ijesrt) Vol. 3 Issue 3, March  2014
  • S.Kagathara , R.D.Gohil, “Review On Design Of Cam Geometry For Minimization Of Fillet Radius Effect In Square Hole Drilling Operations”, International Journal For Research In Technological Studies Vol. 1 Issue 5, April 2014
  • S. Kagthara , Raviraj D. Gohil . Piyush J. Mandaliya, “Design Of Cam Geometry For Minimization Of Fillet Radius Effect In Square Hole Drilling Operation”, International Journal Of Advance Engineering And Research Development (Ijaerd) February, 2015


S.S.Jani

  • S.Jani, “Analysis & Optimisation Of Gear Tooth Profile”, International Conference On Mechanical & Industrial Engineering, July, 2012
  • Shivang S. Jani, “Analysis & Optimisation Of Gear Tooth Profile”,International Journal of Mechanical and Production Engineering, Vol-2, Issue-1, 2013
  • S.Jani, A.L.Dudhatra,“Design & Development Of Fixture For Lathe Machine –Reviews”, International Journal Of Futuristic Trends In Engineering And Technology, Vol. 1 Issue 5 , April 2014
  • Vijay Sutariya, Shivang Jani, “Design and Modelling of Unscrambler for bottle packaging”, Journal of Emerging Technologies and Innovative Research, Volume 1 Issue 7, December-2014.
  • Chirag A. Vakani, Shivang S. Jani, “Analysis and optimization of 270o Jib Crane Deflection: A Review”, Vol. 2, Issue 10,2014.
  • Chirag A. Vakani, Shivang S. Jani, Design and Analysis of 0.5 ton Jib Crane Performance Characteristics, Vol. 2, Issue 6,2015.
  • Vijay Sutariya, Shivang S. Jani, “Design and Modelling of Unscrambler for bottle packaging”,International Journal of Advance Research in Engineering, Science & Technology, Volume 2 Issue 6, June-2015.
  • Akash Shukla, S.S. Jani, G.D. Acharya, “Feature Based Time Estimation”: A Review, Journal of Production Research & Management, STM Journals, Vol. 5, Issue 3,2015.
  • Shivang S. Jani, Jayendra B. Kanani, “Study of Gear Tooth Profile Strength Increment”:A Review, Trends in Machine Design, STM Journals, Vol. 3, Issue 1, 2016.
  • Jayendra B. Kanani, Shivang S. Jani, “Study of Crankshaft Failure”:A Review, Trends in Machine Design, STM Journals, Vol. 3, Issue 1, 2016.
  • Akash Shukla, S.S.Jani, Dr. G.D.Acharya, “Developing a Cam Estimator for feature based machining time estimation in VB environment”, International Journal of Advance Research and Innovative Ideas in Education. Vol.2, Issue 3, 2016.
  • Shukla Akash., Jani S. S., Acharya G. D., “Another Look towards Product Cost Estimation using Feature Techniques”,Journal of Production Research & Management, STM Journals, Vol. 6, Issue 1, 2016.
  • Kashyap V. Mehta, Shivang S. Jani, Dr. G. D. Acharya, “Influence of Sulphur Diffusion on the Surface of Furan No Bake Casting” -A Review, Trends in Mechanical Engineering & Technology, STM Journals, Vol. 6, Issue 1, 2016.
  • Din Bandhu, Shivang Jani, and Ashish Thakur, “Characterization of Frictional Stir Welding for two dissimilar materials and Influence of Ageing on their Mechanical Properties”, International Journal of Research in Engineering, IT and Social Sciences, Vol.07, Issue 2, February -2017.
  • Jignesh Khara, Shivang Jani, Dr.G.D.Acharya, “Parametric analysis and multi objective optimization of cutting parameters in turning operation of AISI 4340 using GRA”, International Journal of Advance Research and Innovative Ideas in Education, Vol.03, Issue 2,April-2017.
  • Shubham V. Rupani, Shivang S. Jani, D.Acharya, “Design, Modelling and Manufacturing aspects of Honeycomb Sandwich Structures: A Review”, International Journal of Scientific Development and Research, Vol.02, Issue 4, April-2017.
  • Shubham V. Rupani, Rahul Dev, Shivang S. Jani, Dr. G.D.Acharya,“Experimental evaluation of Coefficient of Thermal Expansion of Carbon Fiber Reinforced Polymer tube”, International Journal of Advance Engineering and Research Development, Vol.04, Issue 4, April-2017.


D. Saradava

  • Ketan Saradava , Pratik Parsania, “Drive-By-Wire System” In Automobile Journal Of Systematic Computing  6 Issue 2, December  2012
  • D.Saradava, N. L. Mehta, B.M.Garala,  “Design Of Feed Drive System For Special Purpose Cnc Turning Machine”, International Journal Of Mechanical And Production Engineering Research And Development (Ijmperd) Vol. 3 Issue 2, June  2013
  • D.Saradava, K.H.Jadeja, “Property Analysis Of Alumina Refractory Bricks – A Review”, International Journal Of Futuristic Trends In Engineering And Technology(Ijftet) Vol. 1 Issue 9, October  2014
  • J. Mandaliya, K.D. Saradava, Dr. P.S. Puranik, “Case Study: To Reduce Shrinkage Defect In Piston Sleeve Manufactured By Sand Casting Process Byusing Simulation Software”, Open Journal of Engineering Research and Technology,Volume 1, Issue 1 (2016)
  • Hardik H. Bhatta, Ketan D. Saradava, “Contouring Accuracy in CNC Machine”, International Journal of Engineering Development and Research (IJEDR),Volume 4, Issue 1 ,ISSN: 2321-9939, 2016
  • Hardik H Bhatt, Ketan D Saradava, “Contouring Accuracy Improvement in VMC V-544”, International Journal of Advance Research and Innovative Ideas in Education(IJARIIE), ISSN(O)-2395-4396, Vol-2 Issue-3 2016
  • Ketan D. Saradava, Piyush J. Mandaliya, Pratik A. Parsania, “Design of Machine Shaft in Fatigue Loading by Using C++ Programming Language”, Trends in Machine Design(STM Journals), ISSN: 2455-3352(online), Volume 3, Issue 1, 2016
  • Kaushik V Kanani, Ketan D Saradava, “A review on performance of a billet quality by reducing shrinkage and porosity defects in steel by CFD in continuous casting”, International Journal of Research in Science and Technology, e-ISSN: 2249-0604, p-ISSN: 2454-180X, No. 7, Issue No. I, Jan-Mar 2017.


H N Chauhan

  • N.Chauhan, M.P.Bambhania, “Design & Analysis Of Frame Of 63 Ton Power Press Machine By Using Finite Element Method”, Indian Journal Of Applied Research July 2013
  • N.CHAUHAN,KAMAL DER, “Design & Modeling of Boring Fixture for Roller Stand”,International Journal For Research in technological studies, Volume 1, Issue 12, November 2014


J. Mandaliya

  • J. Mandaliya ,J.T. Dave, “Study Of Piston Sleeve Manufactured By Sand Casting Process To Reduce Rejection Rate Using Simulation Software”, International Journal Of Mechanical And Production Engineering Research And Development (Ijmperd)  Vol. 3 Issue 02, June 2013
  • J. Mandaliya, J. H. Solankiv, R. Maniar, “Analysis And Base Line Performance Of Ci Engine With Cashew Nut Shell As Fuel”, International Conference On Information Knowledge In Engineering Technology And Science (Icikr-Ets-2012) March 2012
  • Piyush Mandaliya, Niraj Vangani, “Design And Analysis Of Fork Pin And Its Assembly In Hydraulic Cyclinder”,  International Journal For Research In Technological Studies (Ijrts) Vol. 2 Issue 1, December 2014


M V Sheladiya

  • V.Sheladiya, Shailee G. Acharya, Jeetendra A. Vadher,  “Defects Minimization In Furan No Bake (Fnb) Casted Motor Body Using Six Sigma Approach”, 7th International Conference On Emerging Perspectives, Practices And Research Trends In Information Systems And Operation Management February 2015
  • V.Sheladiya, Shailee G. Acharya, Jeetendra A.  Vadher,  “Hot Foundry Sand – A Major Problem In Furan No Bake Molding System” International Conference On:  “Engineering: Issues, Opportunities And Challenges For Development April 2015-05-13
  • V.Sheladiya, Shailee G. Acharya, Jeetendra A. Vadher,  “Analysis Of Fnb Casting Defects In Foundry  – A Need Of The Day To Improve Productivity Of Foundry” 63rd Indian Foundry Congress February 2015
  • V.Sheladiya, Shailee G. Acharya, Jeetendra A.  Vadher, “Identifying Path To Defect Free Iron Casting Through Evaluation Of Sand Of Fnb Mould System” 3rd International Conference On Science, Engineering & Technology March 2015
  • V.Sheladiya, Shailee G. Acharya, Jeetendra A. Vadher, “Evaluation Of Gas Porosity Defect In Furan No Bake System”, National Conference On Innovative & Emerging Technology April 2015
  • V.Sheladiya, S.A.Kansagara, “A Review On Hdpe Pipe Extrusion Machine Temperature Variation”, International Journal For Scientific Research & Development Vol. 2 Issue 10, July  2014
  • Manojkumar Sheladiya, Vinay Bhatt, Pratik Kikani, Sagarkumar Shah, Jinesh Shah, “Research On Unsteady State Heat Conduction In Slab & Cylinder” Indian Journal Of Applied Research Vol. 3 Issue 8, August 2013


I. Shah

  • I. Shah, Vinay Bhatt, Jinesh Shah, Manojkumar Sheladiya, Pratik Kikani, “Study Of Thermal Insulating Materials And Costing Of Economic Thickness Of Insulation” Indian Journal Of Applied Research Vol. 3 Issue 8, August 2013.
  • I. Shah, Pandya Hardik, “Review Of Implementation Of Lean Manufacturing In Manufacturing System”, International Journal For Scientific Research & Development Vol. 2 Issue 10, December 2014.
  • Sagar I. Shah, Pandya Hardik, “Lean manufacturing implementation using value stream mapping in an automotive industry”, International Journal of Advance Engineering & Research Development (IJAERD), Vol. 2, Issue 5, May 2015.
  • Sagar I. Shah, “Effect of Geometry and Arrangement of Pin Fin in Heat Exchanger: A Review”, International Journal of Emerging Technologies and Innovative Research (JETIR), ISSN:2349-5162, Vol.3, Issue 2, February-2016.
  • Shah Sagar, Sonagara Yagnesh, Hadiyal Ashok, “Minimization of Wet Bulb Temperature of Ambient Air for Improve Efficiency of Cooling Tower”, International Journal of Engineering Development and Research (IJEDR), ISSN: 2321-9939, Vol.4, Issue 1, March 2016.
  • Sagarkumar Indravadan Shah, “Improvement in Energy and Exergy Efficiency by Applying Thermal Insulation as per ASTM C680: A Review”, STM Journal – Journal of Thermal Engineering and Application (JOTEA), ISSN: 2349-8994(online), Vol.3, Issue 1, May 2016.
  • Sagar I. Shah, Jinesh B. Shah, “Comparison of PQR and WPQ for Jacket Long Seam Joint of Pressure Vessel as per ASME Section IX”, STM Journal – Journal of Materials & Metallurgical Engineering (JOMME), ISSN: 2231-3818 (online), ISSN: 2321-4236 (Print), Vol.6, Issue 2, June 2016.
  • Sagar I. Shah, Maulik A. Raval, G. D. Achrya, “Optimization of Pulsed Gas Metal Arc Welding Parameters for Fabrication of Austenitic Stainless Steel”, International Journal of Advance Research and Innovative Ideas in Education (IJARIIE), ISSN: 2395-4396 (online), Vol. 3, Issue 2, April 2017.


T Kikani

  • Pratik Kikani. “Study of Shielded Gases for MIG Welding.” Journal of Materials & Metallurgical Engineering 6.1 (2016): 6-10.
  • T.Kikani, Vaghela, Mr CB and Mr NJ Chotai. “Analysis of Process Parameters for Resistance Spot Welding on Cold Reduced Low Carbon Steel.” International Journal of Futuristic Trends in Engineering and Technology  2 (2015): 12.
  • Pratik T. Kikani, Dhruv Shailesh Gosani, “EFFECT OF VIBRATION IN ARC WELDING USING SAE 1010 STAINLESS STEEL.”Journal of Emerging Technologies and Innovative Research 2 (2016): 17-20.
  • Pratik Kikani, Dr. Hemantkumar R. Thakkar. “Study of cracking susceptibility in Al alloys welds.”2nd International Conference on Emerging Trends in Mechanical Engineering. 2017.
  • Pratik Kikani, Nirali Pandya, Ketan Dhruv, Dr. G. D. Acharya. “Establish the Value Stream Mapping For Lead Time Evaluation by Lean Concept.”International Journal of Advance Research, Ideas and Innovations in Technology 1 (2017): 401-406.
  • Pratik Kikani, Nirali Pandya, G.D. Acharya. “Analyze the Value Stream Mapping for Lead Time Reduction by Lean: A Review.”Journal of Industrial Safety Engineering 1 (2017).
  • T.Kikani, Vaghela, Mr CB and Mr N J Chotai “Analysis of Process Parameters for Resistance Spot Welding Process Using Taguchi Method – A Review”. International Journal of Futuristic Trends in Engineering and Technology 1.9 (2014): 8-11.
  • Pratik Kikani, Priyanka Jhavar, Dr.G R Selokar “Experimental Performance Evaluation of Heat Transfer Rate in Automobile Radiator Using Nanoparticles (Al2o3)”. PARIPEX – INDIAN JOURNAL OF RESEARCH 2.9 (2013): 95-97


B.Shah

  • Jinesh Shah, Mohammad Azim Aijaz, Pratik Kikani, Sagarkumar Shah, Manojkumar Sheladiya, ” Validation Of Sst 300 Bearing Casting For Sst 200 Bearing Casting In Static Load Condition”, Indian Journal Of Applied Research Vol. 3 Issue 7, July  2013
  • Jaydeep R. Odedara1 Jinesh B. Shah2 Pallav M. Radia “ Optimization of the Process Parameters of Wire Cut EDM – A Review”   IJSRD – International Journal for Scientific Research & Development| Vol. 3, Issue 10, 2015 | ISSN (online): 2321-0613
  • Nikunj, J.B.Shah “ Review paper on improve quality in sand casting using Total Quality Managemnet” IJSRD – International Journal for Scientific Research & Development| Vol. 2, Issue 10, 2014 | ISSN (online): 2321-0613
  • Jinesh Shah “ Offshore Wind Energy-A Review “ Journal of Offshore Structure and Technology  ISSN: 2349-8986(online)  Volume 2, Issue 3
  • Jaydeep odedra, Jinesh Shah “ Optimization of process parameters of wire electrical discharge machining of T16Al4V using teaching learning based optimization” International journal of Advance Research and Innovative Ideas in Education ,Vol.-2 , issue- 3 , 2016 ISSN  2395-4396
  • Snehal S. Jani1,*, Jinesh B. Shah, Kalpit V. Vala “ Design and Analysis of Helical Gear Pair using ANSYS, FEM and AGMA Standards for Calculating a Bending and Contact Stress on Gear Profiles: A Review “  Journal of Thermal Engineering and Applications ISSN: 2349-8994 (Online) Volume 4, Issue 1
  • Snehal S. Jani1, Jinesh B. Shah1 “Design, Modelling and Analysis of Helical Gear Pair using ANSYS and AGMA Standards for Calculating a Bending and Contact Stress on Gear Profiles.” International journal of Advance Research and Innovative Ideas in Education  -3 , issue- 2 , 2017       ISSN  2395-4396


Ravi C. Patel

  • C.Patel,R.G.Vaghela,K.J.Gohil, “Design And Analysis Of C-Frame Of 40 Ton Pneumatic Power Press Using Fea”, Journal Of Emerging Technologies And Innovative Research Vol. 1 Issue 2, July 2014


N. Khilosia

  • N.Khilosia, L.M.Rola, “Development And Implementation Of Mechanism By Using Pneumatic Drive For Bamboo Stick (Agarbatti Stick) Cutting Machine”, International Journal Of Advance Engineering And Research Development (Ijaerd) Vol. 1 Issue 3, April 2014
  • N.Khilosia N.M.Mirani, , Design Optimization & Analysis Of Diffuser Used In Multistage Electrial Submersible Pump (Esp), International Journal Of Advance Engineering And Research Development, December, 2014.


L. Dudhatra

  • Amit Dudhatram, Satyajeetsinh Raijada, “Design Of A Fixture Of Connecting Rod For Boring Operation” Ijsrd – International Journal For Scientific Research & Development Vol. 2 Issue 9, November 2014


J. Thoriya

  • Pritesh J.Thoriya, B.N.Gelot, Performance Evaluation And Simulation Of Polymer Ball Bearing In Electric Motor & Circulating Pump Application- A Review, International Journal Of Advance Engineering And Research Development (Ijaerd), April, 2014.
  • P J Thoriya, B N Gelot, Performance Evaluation And Simulation Of Polymer Ball Bearing In Electric Motor & Circulating Pump Application, International Journal Of Advance Engineering And Research Development (Ijaerd), May, 2014.
  • J Thoriya V.G Chhanya, , Review On Design Improvement Of Mixed Flow Pump, International Journal Of Advance Engineering And Research Development (Ijaerd), May,2014.


B.J.Saradava

  • B J Saradava, Vishvesh J Upadhyay, Raj Dadhania, Mayur Gosai, “Proposed Design Of Self Propelled Aerial Vehicle”, International Journal of Advance Engineering and Research Development (IJAERD), 1, Issue 5, May- 2014, e-ISSN: 2348 – 4470 , print-ISSN:2348-6406 and Page No.172-178.
  • Biren J Saradava, Rajdevsinh K Gohil, Alpesh V Mehta, , Jaydeepkumar P Bavarva, “Waste Heat Recovery Using Striling Engine”, International Journal Of Advanced Engineering Technology, Vol. 3, Issue 1, Jan-Mar 2012, E-ISSN 0976-3945 and Page No. 305-310.
  • Biren J. Saradava, Nikunj V. Rachchh, R. K. Misra, D. G. Roychowdhary, “Mechanical Characterization Of Coir Fiber Reinforced Polymer Composite Using Red Mud As Filler”, Journal Of Information, Knowledge And Research In Mechanical Engineering, Vol. 2, Issue 2, Nov. 2012, ISSN – 0975 – 668X and Page No. 472-476.
  • Biren J. Saradava, Dhaval P. Vaishnav, Vimal C. Tadhani, Bhardvaj H. Rangpariya, “Experimental Investigation And Analysis Of Thrust(Part) In V4 Submersible Pump-A Review”, International Journal Of Advance Engineering And Research Development, 1, Issue 11, Nov.- 2014 | ISSN (Print) : 2348-6406 ISSN (Online): 2348-4470, Pg no. 55-56.
  • Biren J. Saradava, Amit J. Sakariya, , “A Review On Implimentation Of Lean Manufacturing In Maize Grinding Mill Assembly Line”, Journal of Industrial Safety Engineering, Volume 3, Issue 1,May 2016, ISSN: 2395-6674(online), Pg. No. 10-14.
  • Pritesh J. Thoriya, Biren J. Saradava, Prasad S Puranik, “Optimization of Dynamic Load Carrying Capacity of Rolling Contact Bearing by Using TLBO Technique: A Review”, Journal of Materials & Metallurgical Engineering,  5, Issue 3, Dec 2015, ISSN: 2231-3818(online), ISSN: 2321-4236(print), Pg. No. 41-43.
  • N. Khilosia, A. L. Dudhatra, B. J. Saradava, “Vegetable Oil as an Eco-Friendly Cutting Fluid for Different Machining Operation: Review”, Research & Reviews: Journal of Ecology, Vol. 4, Issue 3, Dec 2015, ISSN: 2278-2230(online), Pg. No. 15-18.
  • Biren J. Saradava, Abhishek J. Kathwadia, Ajit D. Gorviyala, Vatsal K. Joshi, “Mechanical characterization of hemp fiber reinforced polyester composites: A Review”, Journal of Polymer & Composites, Vol. 4, Issue 1,April 2016, ISSN: 2321-2810(online), ISSN: 2321-8525(print) Pg. No. 1-3.
  • Biren J. Saradava, Dhairya J. Solanki, Pritesh J. Thoriya, “Design and Modification of air dehumidifier-A Review”,  Journal of Refrigeration, Air Conditioning, Heating and Ventilation ,Volume 3, Issue 1,May 2016, ISSN: 2394-1952(online), Pg. No. 1-3.
  • Avinash A. Jadav, Biren J. Saradava, “Vertical Opposed Piston Engine: A Review”, Journal of Automobile Engineering and Applications, Volume 3, Issue 1,May 2016, ISSN: 2455-3360(online), Pg. No. 34-38.
  • Biren J. Saradava, Abhishek J. Kathwadia, Ajit D. Gorviyala, Vatsal K. Joshi, “Mechanical characterization of hemp fiber reinforced polyester composites”, International Journal of Scientific Development and Research, volume 1, Issue 5, May 2016, ISSN: 2455- 2631 , Pg. No. 754-762.
  • Aditya Singh, G.D. Acharya, Biren J. Saradava,” Evaluation of Surface Crack in EN19 Crank Shaft Found in Forging Process: A Review”, Journal of Recent Trends in Fluid Mechanics, Volume 3, Issue 3, Dec 2016, ISSN: 2455-1961(online), Pg. No. 15-18.

M A Lakhwani

  • Mohit Lakhwani, Dr Jignasa P Mehta, “Design Aspects And Modification In Barbed Wire Making Machine”, International Journal Of Futuristic Trend In Engineering And Technology Vol. 1 Issue , April 2014
  • Mohit Lakhwani, Pratik Oza, “Designing Cim Architecture As A Solution For Small To Medium Manufacturers” Vvp Ites Conference December 2014


H. Makwana

  • H.Makwana, N.D.Gosvami, Review For Various Design Parameters Considered During Mould Design, International Journal For Research In Technological Studies, January, 2014.
  • H.Makwana, Sanjeev Rathiya “Failure in spot welding”, International Journal of Advance Engineering and Research Development, Volume 3, Issue 10, October -2016
  • H.Makwana, Antala romil, Tarpara Akshay, “Review on Causes of oil consumption”, International Journal of Advance Engineering and Research Development, Volume 3, Issue 09, September -2016
  • H. Makwana, “Analysis of rubber bush mould using mould flow and compare with experimental result”
  • H. Makwana,, Ankit V. Vaishnav, ”Reduction of shrinkage porosity defects in sand casting using Finite Element Analysis: A Review”, STM(Journal of Materials & Metallurgical Engineering),Vol. 6,Issue 1,Jan 2016.
  • H. Makwana, Ankit V. Vaishnav,” Modeling of Rubber bush Mould by using DME Standard”, STM( Trends in Mechanical Engineering & Technology),Vol. 6,Issue 1,Jan 2016


D. Makwana

  • D.Makwana, N.D.Gosvami, A Research Paper On Design And Analysis Of Fixture For The Pump Casing, International Journal Of Futuristic Trends In Engineering And Technology, May, 2014.
  • D.Makwana, N.D.Gosvami, “A Study On Fixture Design For Complex Part” International Journal Of Futuristic Trends In Engineering And Technology Vol. 1 Issue 1,February 2014
  • D.Makwana K.M.Viramgama, , A Study On Design Of Fixture For Valve Body For Cnc Machine, International Journal Of Advance Engineering And Research Development (Ijaerd), December,2014.


V. PARMAR

  • Keyur V. Parmar, R. I. Patel, “Current Research Trends In Micro Electrical Discharge Machining: A Review” International Journal Of Innovative Technology And Research Vol. 2, Issue 1, 2014
  • Keyur V. Parmar, R. I. Patel, Experimental Investigation Of Process Parameters Of Micro Edm Drilling On Carbide (K20) Material, International Journal Of Advance Engineering And Research Development (IJAERD), May,2014.
  • R.Dabhi, K.V.Parmar, A Review Paper On Latest Trend On Face Milling Tool, International Journal Of Advance Engineering And Research Development (Ijaerd), January, 2015.
  • V. Parmar Dr. G. D. Acharya Akash R. Radadiya, ” Lean Manufacturing: The Need of the Hour for the Forging Industries” Afro – Asian International Conference on Science, Engineering & Technology Vol. 3, 197-200, 2015
  • Abhishek J. Kathwadia, K. V. Parmar & Dr. G. D. Acharya “Life Cycle Assessment of Turbine Blade” Afro – Asian International Conference on Science, Engineering & Technology, 639 – 642, 2015
  • V. Parmar, Jayendra B. Kanani and Rohan K. Soyaliya “A Review on Unfilling Defect Found in Forging Process” International Journal for Scientific Research & Development, Vol. 3, Issue 10, 2015
  • R.Dabhi and K. V. Parmar “Optimization of CNC Face Milling Process Parameters for WC with TiCN Coated Tool Life” International Journal for Scientific Research & Development, Vol. 3, Issue 5, 2015
  • K V. Parmar M A. Lakhwani ” Sustainable Manufacturing Process: New Trends in Manufacturing”, Journal of Industrial Safety Engineering, Vol. 3, Issue 1, 2016
  • Keyur V Parmar Lakhwani A Mohit “DESIGN ASPECTS MODIFICATION & DEVELOPMENT OF GURUTVA LIGHT” Journal of Industrial Safety Engineering, Vol. 3, Issue 1, 2016
  • KEYUR V PARMAR, Dr. Hemantkumar Thakkar “An overview on recent development in Functionally Graded Materials” International Conference on Emerging Trends in Mechanical Engineering, Feb-2017


V. Vaishnav

  • Ankit V.Vaishnav R.R.Raval, , A Review On FEM Analysis Of Cnc Slanted Bed, International Journal For Research In Technological Studies, January, 2015.
  • Ankit V. Vaishnav, Vivek G. Patel, “ Reduce Shrinkage-Porosity Defects In Sand Casting Using Fem”, International Journal Of Futuristic Trends In Engineering And Technology Vol.1 Issue 5, April, 2014.
  • Ankit V. Vaishnav, R.R.Raval, “Finite Element Analysis of CNC Slanted Bed, International Journal for Scientific Research & Development,Vol.3,Issue 5, July 2015.
  • Ankit V. Vaishnav, ”Reduction of shrinkage porosity defects in sand casting using Finite Element Analysis: A Review”, STM(Journal of Materials & Metallurgical Engineering),Vol. 6,Issue 1,Jan 2016.
  • Ankit V. Vaishnav,” Modeling of Rubber bush Mould by using DME Standard”, STM( Trends in Mechanical Engineering & Technology),Vol. 6,Issue 1,Jan 2016
  • Ankit V. Vaishnav “Non Value Added Time Reduction and Process Cycle Efficiency Improvement by Implementing Inventory Management System”, International Journal Of Engineering Development And Research,Vol. 5, issue 2, Aril 2017.
  • Ankit V.Vaishnav “An Approach to Reduce Non-Value Added Time and Improve Process Cycle Efficiency by Implementing Project Information System”, International Journal for Research in Applied Science & Engineering Technology, Vol.5,Issue 4,April 2017.


H.G.Acharya

  • G.Acharya, Dr.R.L.Jhala, M.R.Sama, “Review – Value Stream Mapping For Improvement In Productivity”,  International Journal For Research In Technological Studies| Vol. 1, Issue 6, May 2014 | Issn (Online) Vol. 1 Issue 5, May 2014
  • Hardik Acharya, Bhavesh Kaila, “Modeling (Mechanical) And Analysis Of Robo-Arm For Pick And Place Operation In Ceramic Industry”, Ijsrd – International Journal For Scientific Research & Development| Vol. 2, Issue 09, 2014


Y. kumar

  • Ashutosh Kumar, Ankit Vekariya, A Review On Improvement Of Workflow And Productivity Through Application Of Time And Motion Study Technique, International Journal For Scientific Research & Development(Ijsrd) Vol. 2, Issue 10, December, 2014.


G. Vaghela

  • G. Vaghela, R. C. Patel, “Design And Analysis Of C – Frame Of 40 Ton Pneumatic Power Press Using Fea”, Journal Of Emerging Technologies And Innovative Research (Jetir), July 2014


P.M.Radia

  • Pallav M. Radia , Saurabh A. Ban , Akash Pandey ” Review Paper Om Electical Discharge Machining Of Superalloy Using Fuzzy Approach” Itame March-2014